Exacta - S

EXACTA-S Press-Fit Monolitic stem

Taper

12/14 (top angle 5°42'30") BIOLOX approved

Bio-active surface

Surface coated with bio-active materials as pure Titanium and Hydroxyapatite to enhance primary stability and promote biological integration

Stability

Vertical and horizontal grooves provides rotational and torsional stability.

12 Implant sizes STANDARD (ccd 135°) LATERAL (ccd 127°)

Easy Surgical Access

The low-profile lateral shoulder design and reduced length enables easy insertion even in minimally invasive surgical approaches, especially suitable for the anterior approach.

EXACTA-S Plus Monolitic stem Cemented

Taper

12/14 (top angle 5°42'30") BIOLOX approved

Polished surface finishing - rounded edges Sinking level marks

12 Implant sizes STANDARD (ccd 135°) LATERAL (ccd 127°)
* References with asterisk are available ON REQUEST

The cemented version presents a polished surface finishing with rounded edges to prevent excessive stress to the cement mantle surrounding the prosthesis.

Standard - CCD 135°
Titanium HaX-Pore X-Pore HA
Size L(mm) Offset(mm) L2(mm) Reference Reference Reference Reference
1 91.3 40.0 41.0 11561* 11961 11861* 11641*
2 98.3 40.5 41.0 11562* 11962 11862* 11642*
3 101.7 41.0 42.0 11563* 11963 11863* 11643*
4 105.4 42.0 43.0 11564* 11964 11864* 11644*
5 108.9 43.3 44 11565* 11965 11865* 11645*
6 112.3 43.5 44.5 11566* 11966 11866* 11646*
7 115.8 44.5 45.0 11567* 11967 11867* 11647*
8 119.3 45.0 45.0 11568* 11968 11868* 11648*
9 122.8 45.0 45.2 11589* 11979 11869* 11649*
10 125.3 45.5 45.2 11590* 11980 11870* 11650*
11 128.8 45.5 45.8 11591* 11981* 11871* 11651*
12 132.3 46.0 46.5 11592* 11982* 11872* 11652*
Lateral - CCD 127°
Titanium HaX-Pore X-Pore HA
Size Offset(mm) L2(mm) Reference Reference Reference Reference
1 46.0 45.8 11571* 11971 11881* 11661*
2 46.5 46.0 11572* 11972 11882* 11662*
3 48.0 47.5 11573* 11973 11883* 11663*
4 49.0 48.5 11574* 11974 11884* 11664*
5 50.0 49.5 11575* 11975 11885* 11665*
6 51.0 50.5 11576* 11976 11586* 11666*
7 52.0 51.0 11577* 11977 11887* 11667*
8 52.5 51.0 11578* 11978 11888* 11668*
9 52.5 51.5 11579* 11989 11889* 11669*
10 53.0 52.0 11580* 11990 11890* 11670*
11 53.0 52.0 11581* 11991* 11891* 11671*
12 53.5 52.5 11582* 11992* 11892* 11672*
Standard - CCD 135°
Polished Matt
Size L(mm) Offset(mm) L2(mm) Reference Reference
1 97 40.0 39.0 12011 12051*
2 100 40.5 39.0 12012 12052*
3 110 41.0 39.0 12013 12053*
4 115 42.0 40.0 12014 12054*
5 120 43.3 41.0 12015 12055*
6 125 43.5 42.0 12016 12056*
7 130 44.5 42.7 12017 12057*
8 135 45.0 43.3 12018 12058*
9 140 45.0 43.3 12019 12059*
10 145 45.5 43.3 12020 12060*
11 150 45.5 44.0 12021* 12061*
12 155 46.0 44.5 12022* 12062*
Lateral - CCD 127°
Polished Matt
Size Offset(mm) L2(mm) Reference Reference
1 46.0 43.0 12031 12071*
2 46.5 43.0 12032 12072*
3 48.0 43.5 12033 12073*
4 49.0 45.5 12034 12074*
5 50.0 46.5 12035 12075*
6 51.0 47.0 12036 12076*
7 52.0 47.8 12037 12077*
8 52.5 48.4 12038 12078*
9 52.5 48.4 12039 12079*
10 53.0 48.4 12040 12080*
11 53.0 49.0 12041 12081*
12 53.5 49.5 12042* 12082*

Informations

INTENDED PURPOSE:

EXACTA S stems are intended for use in total or partial Hip Replacement procedures, combined with a femoral ball head (or a bi-articular head) and an acetabular cup. Indicated for primary hip arthroplasties in cases of serious joint degeneration, mainly due to arthrosis and post-traumatic degenerative factors. Device fixation is obtained by means of primary cementless press-fit stabilization or by using bone cement, depending on the version utilized.

MATERIALS:

Cementless stems: Titanium Aluminium Niobium forged alloy (Ti6Al7Nb)

ISO5832/11 Cemented stem: PM734 higly nitrogenized Stainless Steel forged alloy ISO5832/9

SURFACE FINISHING:

EXACTA S Titanium: microstructured sandblasted surface roughness 4-6µm

EXACTA S HaX-Pore: double coating 300µm pure Titanium+50µm Hydroxyapatite Ca10(OH)2(PO4)6 plasma sprayed

EXACTA S X-Pore: coating 300µm pure Titanium plasma sprayed

EXACTA S HA: coating 80µm Hydroxyapatite Ca10(OH)2(PO4)6 plasma sprayed

EXACTA S Plus: mirror polished or matt (sandblasted, on request) finishing surface

STERILIZATION:

Method: Irradiation (nominal dose 25 kGy), in vacuum.

Validity: 5 years.

CLASSIFICATION:

CLASS III as reported in Directive 2005/50/CE (and related D.lgs 26 april 2007 n.65) concerning re-classification of Hip, Knee and Shoulder joint prostheses which modifies classification criteria of Annex IX of Directive 93/42/CEE and next integrations and amendements.